![background image](http://html.mh-extra.com/html/icom/ic-7600/ic-7600_instruction-manual_612307142.webp)
ACC set mode (Continued)
■
SEND Relay Type
MOS-FET
Selects the switching relay type for [RELAY] from
Reed and MOS-FET.
Select the suitable relay type when connecting a
non-Icom linear amplifier.
• Reed
: Use mechanical relay.
(16 V DC/0.5 A max.: default)
• MOS-FET : Use semiconductor type relay.
(250 V/200 mA max.)
External Meter Output
Auto
Selects the desired item for an external meter
indication.
• Auto : Outputs the receiving signal strength level
during receive, and outputs the selected
level (selected with [METER]), during
transmit. (default)
• S
: Outputs the receiving signal strength level
during receive.
• Po
: Outputs the transmitting power level
during transmit.
• SWR : Outputs the VSWR level during transmit.
• ALC : Outputs the ALC level during transmit.
• COMP : Outputs the compression level during
transmit.
• V
: Outputs the drain terminal voltage of the
final amplifier MOSFETs.
• I
: Outputs the drain current of the final
amplifier MOSFETs.
External Meter Level
50%
Sets the output level for an external meter indication
with in 0% to 100% range in 1% steps.
• Approximately 2.5 V at 50% (default) setting for
full-scale indication. (4.7 k
ø
impedance)
REF Adjust
50 %
(Example)
Adjusts the internal reference signal frequency
within 0% to 100% range in 1% steps during
frequency calibration.
NOTE: Default setting is different for each
transceiver.
133
10
SET MODE
Summary of Contents for IC-7600
