manualshive.com logo in svg

Icom IC-7600, Instruction Manual, Page: 78 / 196

Share
Download
Icom IC-7600 Instruction Manual Download Page 78

69

4

RECEIVE AND TRANSMIT

• Center mode screen

• Fixed mode screen

 

■

Spectrum scope screen

This DSP-based spectrum scope allows you to 
display the activity on the selected band, as well as 
the relative strengths of various signals. 

The IC-7600 has two spectrum scope modes. One is  
the center mode, and another one is the fixed mode. 
You can also turn the waterfall display ON or OFF for 
your convenience.
In addition, there is a mini scope screen to save 
screen space.

• Center mode screen (Wide screen)

• Fixed mode screen (Waterfall OFF)

Grid (frequency/level)

Span (Display range)

Edge (Lower frequency)

Display frequency (moves)

Display frequency (stays on Center)

Spectrum scope zone

Spectrum scope zone

Waterfall zone

Waterfall zone

Grid (frequency/level)

Center/Fixed mode icon

Center/Fixed mode icon

Span (Display range)

Edge (Upper frequency)

Summary of Contents for IC-7600





































































































































































































Reviews:

No comments