![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283038.webp)
33
4
MEMORY OPERATION
New2001
New2001
New2001
D
Directly entering into a Memory bank
You can also enter the memory content directly into a memo-
ry bank channel. This way is a short cut to creating a memory
channel, and then assigning it to a bank.
In that case, the transceiver automatically selects the lowest
blank memory channel, to enter content into.
Example: Writing 434.100 MHz into Bank group “A.”
Push [V/MHz SCAN]
q
S
.
• Selects the VFO mode.
Set the operating frequency to 434.100 MHz.
w
Push [MW]
e
C
to display the Memory write screen.
Rotate [DIAL]
r
S
to select “BANK.”
Push [
t
ï
]
D
.
Rotate [DIAL]
y
S
to select a Bank group “A.”
Select
Push [
u
ï
]
D
.
Rotate [DIAL]
i
S
to select “WRITE.”
Push [
o
ï
]
D
.
• Displays “WRITE?.”
!0
Rotate [DIAL]
S
to select “YES.”
!1
Push [
ï
]
D
.
• Sounds beeps, writes the memory content to the bank channel,
and returns to the VFO mode.
D
Selecting the Memory bank mode
When you select the Memory bank mode, rotating [DIAL]
S
se-
lects only the bank channels assigned to the selected bank.
Push [MR CALL]
q
S
.
• Selects the Memory mode.
Hold down [MAIN BAND]
w
S
for 1 second.
Rotate [DIAL]
e
S
to select a desired Bank group.
• Displays the Bank name, if entered.
Push [MAIN BAND]
r
S
.
• Selects the Memory bank mode.
Rotate [DIAL]
t
S
to select a desired Bank channel.
• Blank channels are not displayed.
• To return to the Memory channels display, select a Memory
channel in step
e
.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display
Setting a Memory bank (Continued)
■