![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283046.webp)
41
5
SCAN OPERATION
New2001
New2001
New2001
■
VFO mode scan
There are 6 scan types: Full scan, Band scan, Program scan,
Program link scan, Duplex scan and Tone scan.
NOTE:
• The frequencies that are set as “PSKIP” channels are
skipped during a scan.
•
When the “P-SKIP” (Program Skip) item in the EXMENU
is set to OFF, even the frequencies that are set as “PSKIP”
channels are scanned.
VFO mode scan
D
Push [V/MHz SCAN]
q
S
.
• Selects the VFO mode.
Hold down [V/MHz SCAN]
w
S
for 1 second.
• Displays the scan type setting screen.
Rotate [DIAL]
e
S
to select a desired scan type.
• ALL:
Full scan
• BAND:
Band scan
• P-LINK0~9:
Program link scan
• PROG00~PROG24: Program scan
• DUP:
Duplex scan (p. 50)
( Appears only when duplex is set.)
• TONE:
Tone scan
Push [V/MHz SCAN]
r
S
to start the scan.
To cancel the scan, push [V/MHz SCAN]
t
S
.
While scanning
Displays the scan type
Blinks
Blinks
When receiving a signal
The S-meter shows the received signal strength.
Blinks
Blinks
When a scan name is assigned.
(p. 13)
When a scan name is assigned, it is displayed on the scan
type setting screen. (Step
e
on this page)
See page 39 to enter a scan name.
When a program link name is assigned.
(p. 14)
When a program link name is assigned, it is displayed on the
scan type setting screen. (Step
e
on this page)
See the Icom website to enter a program link name.