![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283010.webp)
5
1
PANEL DESCRIPTION
New2001
New2001
New2001
■
Main unit
q
CONTROLLER CONNECTOR [CONTROLLER]
(p. 63)
Connects to the Controller using the supplied control cable.
w
MICROPHONE CONNECTOR [MIC]
Plug in the supplied HM-207 microphone or the optional
HM-154 microphone.
e
ANTENNA CONNECTOR
(p. 67)
Connect a 50
ø
impedance antenna with a PL-259 con-
nector.
The transceiver has a built-in duplexer, so you can use a
144 and 430 MHz dual-band antenna without needing an
external duplexer.
r
COOLING FAN
The cooling fan for heat dissipation.
You can select the Fan control option in EXMENU, to au-
tomatically start rotating when you begin transmitting, or
continuously rotate from power ON. (p. 14)
t
DC POWER SOCKET [DC 13.8V]
Connect a 13.8 V DC power source through the supplied
DC power cable.
y
EXTERNAL SPEAKER JACK 2 [SP2]
u
EXTERNAL SPEAKER JACK 1 [SP1]
Connect an 8 ohm external speaker.
• See the following list for the speaker connection and audio out
-
put details.
Ext. speaker
connection
status
Audio output
External speaker
Internal speaker
SP-1
SP-2
SP-1 and SP-2
Left band
Right band
–
SP-1 only
Both bands
–
–
SP-2 only
–
Right band
Left band
D
Microphone connector information
1
2
3
4
5
6
7
8
Front panel
view
1 8 V
+8 V DC output
Maximum 10 mA
2 MIC U/D Frequency Up/Down
UP: Ground
DN: Ground through 470
˘
3 M8V SW HM-207 connection
Grounds when the HM-207 is connected.
4 PTT
PTT input
Ground for transmission
5 MIC E
Microphone ground
6 MIC
Microphone input
7 GND
PTT ground
8 DATA IN
Inputs HM-207 data when the HM-207
is connected.
q
w
e
r
t
y
u
Front panel
Rear panel