![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283025.webp)
New2001
20
2
MENU MODE
New2001
2
MENU MODE
DTCS Code
(Default: 023)
Select a DTCS (both encoder/decoder) code for the DTCS
squelch.
A total of 104 codes (023~754) are selectable.
• DTCS codes
023
025
026
031
032
036
043
047
051
053
054
065
071
072
073
074
114
115
116
122
125
131
132
134
143
145
152
155
156
162
165
172
174
205
212
223
225
226
243
244
245
246
251
252
255
261
263
265
266
271
274
306
311
315
325
331
332
343
346
351
356
364
365
371
411
412
413
423
431
432
445
446
452
454
455
462
464
465
466
503
506
516
523
526
532
546
565
606
612
624
627
631
632
654
662
664
703
712
723
731
732
734
743
754
DTCS Polarity
(Default: BOTH N)
Select the DTCS polarity to use for transmitting and receiv-
ing.
• BOTH N: TX and RX polarity are Normal.
• TN-RR: TX polarity is Normal, RX polarity is Reverse.
• TR-RN: TX polarity is Reverse, RX polarity is Normal.
• BOTH R: TX and RX polarity are Reverse.
Tuning step
(Default: 5.0)
When you rotate [DIAL] in the VFO mode, the frequency
changes in the selected tuning step.
The selected tuning step is also used for a VFO mode scan.
Tuning steps (kHz):
5, 6.25, 8.33*, 10, 12.5, 15, 20, 25, 30, 50, or AUTO*
*Appears only when the AIR band is selected.
•
In the AIR band, you can select only “8.33,” “25” or “AUTO.”
(Default: AUTO)
•
The default settings may differ, depending on your trans-
ceiver’s version.
Backlight
(Default: 4)
Set the backlight brightness level to between 1 (Dark) and 4
(Bright).
Priority scan
(Default: OFF)
Starts or stops the Priority scan.
• OFF: Stops the Priority scan.
• ON: Starts the Priority scan.
When a signal is received on the priority channel, the
channel is automatically selected.
• BELL: Starts the Priority scan.
When a signal is received on the Priority channel,
beeps sound, and the “
” icon blinks on the display.