![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283052.webp)
47
6
PRIORITY WATCH
New2001
New2001
■
VFO and a Memory/Bank scan
D
VFO frequency and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every
5 seconds, while receiving on a VFO frequency.
Set the VFO frequency. (p. 24)
q
Select the Memory mode. (p. 23)
w
Hold down [V/MHz SCAN]
e
S
for 1 second.
Rotate [DIAL]
r
S
to select a desired scan type.
Push [V/MHz SCAN]
t
S
.
• The Memory scan starts.
Push [MENU
y
]
C
.
• Enters the MENU mode.
u
Rotate [DIAL]
S
to select “PRIO” (Priority scan).
Push [
i
ï
]
D
.
Rotate [DIAL]
o
S
to select “ON” or “Bell.”
• ON: Starts Priority Watch.
• Bell: Starts Priority Watch.
When a signal is received on the Priority channel,
the “
” icon appears on the display.
!0
Push [
ï
]
D
.
!1
Push [MAIN BAND]
S
.
• Exits the MENU mode.
• The “PRIO” icon appears, and the Priority watch starts.
• To cancel the Priority watch, select “OFF” in step
o
.
Example: Sequentially checks the Memory channels while re-
ceiving on 433.920 MHz.
Checks the Memory channels every
5 seconds.
Appears
The Memory channels are
sequentially checked.
D
VFO scan and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every 5
seconds during a VFO scan.
Do steps
q
q
through
!1
as shown to the left.
• The “PRIO” icon appears, and the Priority watch starts.
Hold down [V/MHz SCAN]
w
S
for 1 second.
Rotate [DIAL]
e
S
to select a desired scan type.
Push [V/MHz SCAN]
r
S
.
• The VFO scan starts.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display