![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283086.webp)
New2001
81
New2001
New2001
MAINTENANCE
13
■
Resetting
Occasionally, erroneous information will be displayed when,
for example, first applying power. This may be caused exter-
nally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the prob-
lem is still there, perform a Partial reset or an All reset.
D
Partial Reset
A Partial reset resets the operating settings to their default
values (VFO frequency, VFO settings, MENU contents) with-
out clearing the items below:
• Memory channel contents • Scan Edge contents
• Call channel contents
• DTMF memory contents
Push [MENU
q
]
C
.
• Enters the MENU mode.
w
Rotate [DIAL]
S
to select “PART” (
Partial reset
).
( MENU-
EXMENU
> EXMEN-
OTHERS
>
OTHER-
RESET
> RESET-
PART
)
Push [
e
ï
]
D
.
• Displays “RESET?”
Rotate [DIAL]
r
S
to select “YES.”
Push [
t
ï
]
D
.
• The transceiver displays "PART RESET," then the partial reset is
completed.
D
All Reset
BE CAREFUL!
An All reset clears all programming and
returns all settings to their factory defaults. See the Full
Manual for details.
Push [MENU
q
]
C
.
• Enters the MENU mode.
w
Rotate [DIAL]
S
to select “ALL” (All
reset
).
( MENU-
EXMENU
> EXMEN-
OTHERS
>
OTHER-
RESET
> RESET-
ALL
)
Push [
e
ï
]
D
.
• Displays “RESET?”
Rotate [DIAL]
r
S
to select “YES.”
Push [
t
ï
]
D
.
• The transceiver displays "ALL RESET," then the all reset is com
-
pleted.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display