![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283055.webp)
New2001
50
7
REPEATER AND DUPLEX OPERATIONS
New2001
7
REPEA
TER AND DUPLEX
OPERA
TIONS
■
Duplex operation
The Duplex operation shifts the transmit frequency up or
down from the receive frequency by an offset amount.
• This section describes the MAIN band operation.
D
Setting the frequency offset
Enters the MENU mode. (p. 11)
q
w
Rotate [DIAL]
S
to select “OFFSET” (Frequency Offset).
Push [
e
ï
]
D
.
• Goes to the next tree level.
r
Rotate [DIAL]
S
to set a desired frequency offset.
• Set to between 0.000.00 and 59.995 MHz.
• The selected tuning step in the VFO mode is used when setting
the frequency offset.
Push [
t
ï
]
D
.
• Sets the selected value, and goes back to the previous tree lev
-
el.
Push [MAIN BAND]
y
S
.
• Exits the MENU mode.
D
Setting the duplex direction
Hold down [MONI DUP]
q
C
.
•
Displays the duplex direction setting screen.
Rotate [DIAL]
w
S
to select a desired option.
• OFF: For simplex operation (the receive and transmit
frequencies are the same).
• DUP–: The transmit frequency shifts down from the re
-
ceive frequency by the offset amount.
(“DUP–” appears.)
• DUP+: The transmit frequency shifts up from the receive
frequency by the offset amount.
(“DUP” appears.)
Push [MONI DUP]
e
C
.
• Sets the selected offset direction.