![background image](http://html1.mh-extra.com/html/icom/i2730a/i2730a_instruction-manual_3821283041.webp)
36
5
SCAN OPERATION
New2001
5
SCAN OPERA
TION
■
About the scan function
D
VFO scan
(p. 41)
•
ALL
(Full scan)
Repeatedly scans the entire band.
118 MHz
550 MHz
Scan
P SKIP
P SKIP
Jump
•
BAND
(Selected band scan)
Scans all frequencies over the entire selected band.
Band edge
Band edge
Scan
P SKIP
P SKIP
Jump
•
PROG 0
~
24
(Program scan)
Scans the program scan edge range.
Band
edge
Lower
freq.
Higher
freq.
Band
edge
Scan edges
Scan
Jump
Jump
•
P-LINK0
~
9
(Program link scan)
Sequentially scans the program scan edge ranges which
are set to link in the “P-LINK” (Program Link) item of the
EXMENU mode. (p. 14)
For your reference:
The frequencies that are set as
“PSKIP” are not scanned. (p. 13)
NOTE:
At least one program scan edge range must be
programmed to start a program scan. (p. 38)
D
Memory scan
(p. 43)
•
ALL
(Full memory scan)
Scans all Memory channels.
•
BAND
(Selected band memory scan)
Scans all Memory channels in the same frequency band as
the selected channel.
•
MODE
(Mode memory scan)
Scans Memory channels that are programmed with the
same receiving mode as the currently selected mode.
D
Memory bank scan
(p. 43)
•
ALL
(Full bank scan)
Scans all banks.
•
B-LINK
(Bank link scan)
Sequentially scans the banks that are set to link in the
“B-LINK” (Bank Link) item of the EXMENU mode.
•
BANK-A
~
J
(Bank scan)
Scans the Memory channels in the selected bank.
For your reference:
The frequencies that are set as
“PSKIP” or “SKIP” are not scanned. (p. 44)
NOTE:
Two or more memory channels must be pro-
grammed to start a Memory scan.