ICETEAM 1927 SL193-011342, Electronic Manual

Page: 41 / 58

SL193-011342 ED00 10-2018 38
Step Contents
T15 Ice Cylinder
When the temperature read through the TEC of one of the two sides
reaches a value equal or less than the value programmed, the machine
goes on to the status "Hot reached" turning off the cold in the cylinder.
Only in PRODUCTION.
Every 10 alarms Ice Cylinder, the alarm stores in the events.
T16 Timeout Prd
In PRODUCTION a programmable time is activated in the step. If the HOT is
not reached within this time, the machine considers that the HOT has been
reached anyway.
The alarm "
Timeout Prd
." Stores in the events.
T17 Last cones
Is the number of cones that the machine can distribute in PRODUCTION
when the low level led has turned on.
Then the machine will go automatically onto STORAGE.
T20 T. Air Period
Value linked to the complete ON/OFF cycle of the EVAria when the
Overrun selected is = 7. the higher the value, the longer the cycle.
T21 T. Air Off
Value linked to the OFF time (liquid) of the EVAria, in the total cycle
provided through T20. The higher the value, the longer the OFF cycle and
then, greater liquid/air relation, generating a lower overrun.
T23 Storage Temp
Set STORAGE temperature.
T29
Set Absor. PP1
Absorption value assigned in the tube test of MP. Either in PRODUCTION,
STORAGE or CLEANING /LOAD, every time the pump starts, it then
deactivates when reaching this value.
T30
Test TEV REG-14
Step T30 indicates the ON+OFF period (in tenths) of the EVFCab when the
T.RC. probe detects a temperature lower than -14ºC. The modulation of
EVFCab is performed in the following times: