SL193-011342 ED00 10-2018
11
Functions
STOP
In this function, the machine is stopped and the led light associated (backlight) is on.
From the STOP it is possible to access any of the machine's functions.
To change function, you MUST return to STOP before.
The display shows:
If the machine is left on STOP with level uncovered, after 30'' the following message is
displayed
“
Why in Stop?
”
to warn the user that the machine should be placed on
PRODUCTION or STORAGE.
Resetting to zero the hour counter MA
–
MP
To reset the MP hours counter to zero:
- The MP counter resets to zero automatically after having performed a calibration of the
pump pipe (see CLEANING/LOAD/CALIBRATION PUMP TUBES).
To reset the MA hours counter to zero:
- Press STOP
for 20”
- When the event reading message (
**READ EVENTS**
) is displayed, wait for the
message "
Reset hrs Count
" to be displayed.
The hours count selected will reset to zero (MA)
Resetting to zero of the total and partial hours counter
By pressing MIX immediately after the return of voltage and keeping it pressed for at least 5"
the total and partial (daily) cones are set to zero.
The display shows:
10:33:21 Fri
Summary of Contents for SL193-011342
