IceCure
™
Medical Ltd.
DSR3200000 rev. G
ProSense
™
Confidential
User Manual
93
Return to first page U.S User Manual
•
Pressing the
RED
button on the straight handle (optional) will start the Warming
process and will initiate the end of the procedure.
•
When the Extraction is done, you may try to extract the cryoprobe from the
tissue.
•
Pressing the
FINISH
icon will terminate the procedure.
Figure 85: Extraction screen in Manual Mode
During the manual procedure, the system provides information regarding treatment
progress:
•
The left side of the screen displays the Current Step (freeze, THAW or
EXTRACTION cycle) and time elapsed for this specific step.
•
The right side of the screen displays information on the entire Protocol as total
elapsed time and treatment format.
•
If you perform more than 3 consecutive freeze/THAW cycles, the right side will
only display the last 5 actions due to screen size limitation (3 freeze THAW cycles).
5.3.4.2
Automatic freeze mode
Choosing one of the suggested protocols from the Treatment Selection screen will open
the automatic protocol screen.
•
To activate the FREEZE/THAW preprogrammed cycles, press the Action button on
the straight cryohandle and hold it for one second or press the FREEZE icon on the
left lower corner of the screen. The
BLUE
LED will light up around the Action
button (optional).
•
The START icon will change to a SKIP icon.
