IC Bus CE Series 2020, Operation And Maintenance Manual

Page: 85 / 287

Driver Controls
ENG BRAKE 1 / 2 / 3:
A three position switch that
selects the amount of engine
braking (1 = Low, 2 = Medium.
3 = High)
EXH BRAKE – ON / OFF:
Turns engine exhaust brake
ON or OFF.
PEDAL ADJ – FWD / BACK:
Allows forward / upward and
back / downward repositioning
of power-adjustable pedals
when key is in the ON position,
the park brake is set, and the
transmission is in neutral or
park.
Cruise Control
Operation
WARNING
To prevent personal injury and / or death, or
damage to property, do not use the cruise control
system when unpredictable driving conditions
are present.
Such conditions include heavy
traffic and / or roads that are winding, icy, snow
covered, slippery, wet, or with a loose surface.
These conditions may cause wheel slippage and
loss of vehicle control.
NOTE: The right console switch panel is the standard
location for the cruise control switches. These switches
may be located on the steering wheel as an available option,
moving the entry door controls and pupil warning indicator
to the right console switch panel.
The electronic engine vehicle speed controls are activated by
the switches located on the console switch panel.
The left ON / OFF switch turns the control feature ON or OFF.
The right switch (SET / COAST — RESUME / ACCEL) sets and
controls the engine speed.
1. Press the ON position on the ON / OFF rocker switch to
activate the cruise control feature.
2. Press the SET position on the rocker switch after
reaching a speed of at least 35 mph (56 km/h) to set
the cruise speed.
71