Maintenance Intervals and Specifications
Lubrication and Maintenance Interval: Bus – CE (Diesel) (cont.)
System
Item
Intervals
Special Interval (3) : miles (km) / hours / months
Air Pressure – Check
A, B
Spin Balance
At time of tire mounting
Wear and Condition – Check
A, B
Tires / Wheels
Wheel Stud Nuts – Retorque
A, B
Accelerator Pedal – Check Function
A, B
Air Conditioner (Optional) – Check Performance
B
All Seat Base Bolts
B
Body – Check loose, damaged, missing parts
A, B
Body Mounting Bolts – Inspect Tightness
1 month or 1,500 miles (2,414 km) and then 3
months or 3,000 miles (4,828 km) thereafter
Chassis – Check for loose, damaged, missing, parts
A, B
Entry Door – Check Operation
A, B
Emergency Windows Slides – Lubricate
Every 12 months
Emergency Doors / Exits and Buzzers – Check
A, B
Fluid Leaks – Check
A, B
Headlights, Bright / Dim / Daytime – Check
A, B
Heater Hoses and Connections – Check Condition
12 months
NOTE: See Heater and Coolant Hose Inspection
and Replacement Guide in this section for
additional information.
Inspect and Clean Step Well and All Other Heater Cores
and Blower Areas
A, B
NOTE: For units without filter, more frequent
cleaning may be required.
Body / Components
241
Summary of Contents for CE Series 2020
