IC Bus CE Series 2020, Operation And Maintenance Manual

Page: 110 / 287

Seating and Safety Restraints
Seatback Adjustment Knob
The seatback adjustment knob is located on the left of the seat
at the intersection of the seatback and the lower seat cushion.
Turn the seatback adjustment knob clockwise to tilt the seatback
forward and rotate the knob counterclockwise to tilt the seatback
rearward.
Lumbar Support
Pull the left switch (lumbar support switch) upward or push
downward to adjust the lumbar support to your preference.
Height Adjustment Switch
Lift the height adjustment switch upward to adjust the seat
height.
While seated, pull the lever up and release when
an acceptable height has been achieved. To lower the seat,
depress the switch and stop when an acceptable height has
been reached.
Driver Seat Belts
WARNING
To prevent personal injury and / or death, or
damage to property, any seat belt in use during
an accident must be replaced. When replacement
of any part of the seat belt is required, the entire
belt must be replaced, both retractor and buckle
sides.
WARNING
To prevent personal injury and / or death,
or damage to property, properly inspect and
maintain seat belts.
Wear your seat belt at all times the vehicle is in motion to avoid
personal injury. Before fastening the seat belt, adjust the seat
to the desirable driving position.
Driver’s lap and shoulder
(three-point) seat belt with retractor is standard.
Driver’s Adjustable Lap and Shoulder
(Three-Point) Belt
WARNING
To prevent personal injury and / or death, or
damage to property, position the safety belt
height adjusters so that the belt rests across
the middle of your shoulder.
Failure to adjust
the safety belt properly could reduce the
effectiveness of the seat belt.
Inspect the entire seat belt assembly for corrosion, wear, fraying
or weak spots. Check the retractor, latch, and buckle for proper
function, and all seat belt mounting bolts for tightness.
96