IBM TotalStorage, Installation Manual

Page: 62 / 91

Error codes
For descriptions of the error codes that can be displayed on the front panel display,
see the appropriate section of the IBM TotalStorage SAN Volume Controller: Service
Guide . The Service Guide contains a full description of the failure and the actions
that you must perform to correct the failure.
SAN Volume Controller menu options
Menu options are available on the front panel display. These options enable you to
review the operational status of the cluster, the node, and the external interfaces.
They also provide access to the tools that you need to install and service the node.
Figure 46 shows the sequence of the menu options. Only one option at a time is
displayed on the front panel display. For some options, additional data is
displayed on line 2. The first option displayed is the cluster option.
Use the Left and Right buttons to navigate through the secondary fields that are
associated with some of the main fields.
Note: Sometimes a message might not display fully on the screen. You might see a
right angle bracket (>) in the right hand side of the display screen. If you
see a right angle bracket, press the
right
arrow button to scroll through the
display. This action displays the rest of the text. Press
left
arrow button to
scroll back. When there is no more text to display, you can move to the next
item in the menu by pressing the right arrow button.
There are five main options available:
v
Cluster
S h u t t i n g D o w n
Figure 45. Shutting down display
Cluster Status IP address Subnet mask
Gateway
Recover cluster?
Node Status Create cluster?
Ethernet
FC Port-1 FC Port-2 FC Port-3 FC Port-4
Select Language?
Main Options Secondary Options
Figure 46. Menu options sequence
40
Installation Guide
|
|
|
|
|
|
|
|