IBM eServer BladeCenter JS20 Type 8842, Installation And User Manual

Page: 78 / 150

Checkpoint code Description Suggested action
E134 Create the memory node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E138 Create the options node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E139 Create the aliases node and system
aliases.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E13A Create the packages node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E140 Load the operating system. See the BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide .
E141 Synchronize the operating-system
boot list with the
management-module boot list.
1. Make sure that the boot list is correct using the
management-module boot list menu.
2. Perform the system checkout procedure. See
“System checkout” on page 58.
3. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.
E142 The management-module boot list is
set from the operating-system boot
list.
1. Make sure that the boot list is correct using the
management-module boot list menu.
2. Perform the system checkout procedure. See
“System checkout” on page 58.
3. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.
E143 The operating-system boot list is set
from the management-module boot
list.
1. Make sure that the boot list is correct using the
management-module boot list menu.
2. Perform the system checkout procedure. See
“System checkout” on page 58.
3. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.
E149 Create the startup manager node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
62
BladeCenter JS20 Type 8842: Installation and User’s Guide