IBM eServer BladeCenter JS20 Type 8842, Installation And User Manual

Page: 81 / 150

Checkpoint code Description Suggested action
E177 Transfer failure due to a TFTP error
condition.
1. Make sure that the BOOTP server is correctly
configured; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. Perform the system checkout procedure. See
“System checkout” on page 58.
4. If there are no problems with the BOOTP server or
the network connection, replace the system-board
assembly. Contact a service support representative
for assistance.
E17B Microprocessor clock-speed
measurement.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
E191 Create an industry standard
architecture (ISA) reserved node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E19A NVRAM auto-boot? variable not
found - assume FALSE.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E19B NVRAM menu? variable not found -
assume FALSE.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E19D Create the NVRAM node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E19E Real-time-clock initialization.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E1A0 Reserved - open firmware function.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E1A1 The user requested startup to the
open firmware prompt that was
initiated by a keyboard entry.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Chapter 10. Solving problems
65