IBM eServer BladeCenter JS20 Type 8842, Installation And User Manual

Page: 76 / 150

Checkpoint code Description Suggested action
D008 Initialize the console and flush the
queues.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D00D Evaluate the NVRAM script.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D010 First pass of the open firmware
initialization is complete; establish
parameters for restart.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D011 First pass of the open firmware
initialization is complete; control
returned to the initialization firmware.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D012 Second pass of the open firmware
initialization is complete; control
returned to the initialization firmware.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D099 Start the system information
validation utility.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
D100 The system serial number was found
to be blank.
1. Enter a valid serial number. The backspace and
delete keys can be used to edit the value entered.
Note: See step 10 on page 46 for more information
about entering the serial number.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for more information.
D101 A machine serial number has been
entered.
Re-enter the serial number used for D100. The
backspace and delete keys can be used to edit the
value entered.
D102 The machine type field has been
found to be blank.
1. Enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
D103 The machine type has been entered. Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
60
BladeCenter JS20 Type 8842: Installation and User’s Guide