IBM eServer BladeCenter JS20 Type 8842, Installation And User Manual

Page: 18 / 150

Record information about the blade server in the following table.
Product name BladeCenter JS20
Machine type 8842
Model number _____________________________________________
Serial number _____________________________________________
The machine type, model number, and serial number are on the identification label
that is behind the control-panel door on the front of the blade server, and on a label
on the side of the blade server that is visible when the blade server is not in the
BladeCenter unit. You will need these numbers when you register the blade server
with IBM.
Release
levers
Control-panel
door
Identification
label
Notes:
v
The maximum number of blade servers that the BladeCenter unit supports varies
by the wattage of the power modules that are installed in the BladeCenter unit.
For more information about determining the power requirements for the blade
server, see the IBM
Eserver
BladeCenter Power Module Upgrade Guidelines
Technical Update on the World Wide Web at http://www.ibm.com/pc/support/.
v
Two power modules are required to support the blade servers in blade bays 1
through 6 in the BladeCenter unit. If you install blade servers in these blade
bays, you must install power modules in power-module bays 1 and 2 in the
BladeCenter unit.
v Two additional power modules are required to support the blade servers in blade
bays 7 through 14 in the BladeCenter unit. If you install blade servers in these
blade bays, you must install power modules in power-module bays 3 and 4 in the
BladeCenter unit.
2
BladeCenter JS20 Type 8842: Installation and User’s Guide