IBM eServer BladeCenter JS20 Type 8842, Installation And User Manual

Page: 79 / 150

Checkpoint code Description Suggested action
E14A Build the vital product
data-to-operating-system lookup
table.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E14C Create the terminal emulator node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E14D Load the startup image. See the BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide .
E150 Create the host (primary) PCI
controller node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
E151 Probe the PCI bus.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E152 Probe for the adapter firmware code;
evaluate if present.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E153 End the adapter firmware code
probing and evaluation.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E154 Create the PCI bridge node.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E155 Probing the PCI bridge secondary
bus.
1. Perform the system checkout procedure. See
“System checkout” on page 58.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
E158 Reserved Contact a service support representative for assistance.
E15B Transfer control to the operating
system (service-mode startup).
See the BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide .
Chapter 10. Solving problems
63