Table 21. C2001000 to C20082FF checkpoints (continued)
v
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v
See Chapter 3, “Parts listing, type 7891,” on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
Description
Action
C2008130
Begin associate of system ports
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2008138
Associating system ports to the partition
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C200813F
End associate of system ports
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20081FF
Processors started successfully, now
waiting to receive the continue
acknowledgement from system firmware
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2008200
Continue acknowledgement received
from system firmware
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20082FF
VSP startup complete successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
114
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)