Table 21. C2001000 to C20082FF checkpoints (continued)
v
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v
See Chapter 3, “Parts listing, type 7891,” on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
Description
Action
C2001100
Adding partition resources to the
secondary configuration
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20011FF
Partition resources added successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2001200
Checking if startup is allowed
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20012FF
Partition startup is allowed to proceed
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2001300
Initializing ISL roadmap
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20013FF
ISL roadmap initialized successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2001400
Initializing SP Communication Area #1
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2001410
Initializing startup parameters
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
Chapter 2. Diagnostics
107