IBM BladeCenter PS703, Service Manual, Page: 177 / 298

Table 27. 101-711 through FFC-725 SRNs (continued)
SRN FFC Description and Action
2E21-701 2E21 221 Error Log Analysis indicates permanent adapter failure.
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E21-702 2E21 221 Error Log Analysis indicates permanent adapter failure is reported on the other port of
this adapter.
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2.
Replace any parts reported by the diagnostic program.
3.
Replace the system-board
2E23-101 2E23 Register Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E23-102 2E23 VPD Checksum Test Failure
1.
Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E23-103 2E23 Flash Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E23-104 2E23 Internal Wrap Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2.
Replace any parts reported by the diagnostic program.
3.
Replace the system-board
2E23-105 2E23 External Wrap Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E23-106 2E23 External Wrap with IP Checksum Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
2E23-107 2E23 External Wrap with TCP Checksum Test Failure
1. Check the BladeCenter management-module event log. If an error was recorded by
the system, see “POST progress codes (checkpoints)” on page 97.
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Chapter 2. Diagnostics
165