Table 18. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, type 7891,” on page 225 to determine which components are CRUs and which
components are FRUs.
Error code
Description
Action
BA330004
Memory allocation error.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
BA340001
There was a logical partition event
communication failure reading the
BladeCenter open fabric manager
parameter data structure from the
service processor.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
BA340002
There was a logical partition event
communication failure reading the
BladeCenter open fabric manager
location code mapping data from the
service processor.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
BA340003
An internal firmware error occurred;
unable to allocate memory for the open
fabric manager location code mapping
data.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
BA340004
An internal firmware error occurred; the
open fabric manager parameter data
was corrupted.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
BA340005
An internal firmware error occurred; the
location code mapping table was
corrupted.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
176.
b.
Replace the system-board, as described
in “Replacing the FRU system-board
and chassis assembly” on page 264.
94
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)