IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 83 / 154

Diskette drive
Before you begin:
v
Read “Important safety information” on page iii.
v
Review the information in “System reliability considerations” on page 35.
To remove the diskette drive, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See “Removing the side cover” on page 41.
4. Disconnect the cables.
5. Remove the screws from the diskette drive cage.
6. Gently slide the floppy disk drive toward the front of the server and lift it out.
Bezel release latch
Before you begin:
v
Read “Important safety information” on page iii.
v
Review the information in “System reliability considerations” on page 35.
To remove the bezel-release latch, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See “Removing the side cover” on page 41.
4. Remove the front bezel. See “Removing the front bezel” on page 61.
5. Remove the handle assembly. See “Handle assembly” on page 75.
6. Remove the top/side cover. See “Top/side cover” on page 74.
7. Press down on the tab.
FRU information (service only)
73