IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 51 / 154

Removing the side cover
To remove the side cover, you might find it easier to lay the computer on its side. If
you do, move the stabilizing feet so that they do not break (see “Moving the
stabilizing feet” on page 40).
Complete the following steps to remove the side cover of the computer:
1. Review the “Important safety information” on page iii.
2. Turn off the computer and all attached devices (see “Turning off the computer”
on page 14).
3. Disconnect all external cables and power cords.
4. Pull the cover-release latch away from the computer, and push the cover toward
the rear of the computer. Lift the side cover off the computer and set it aside.
13
94
For instructions for replacing the side cover, see “Replacing the side cover” on
page 53.
Attention: For proper cooling and airflow, replace the cover before turning on the
computer. Operating the computer with the cover removed might damage computer
components.
Removing and installing the support bracket
When working with some devices, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the device.
Complete the following steps to remove the support bracket:
1. Review the “Installation guidelines” on page 35.
2. Remove the side cover (“Removing the side cover”).
3. Pull out on the rear end of the support bracket approximately 150 mm (6 in.).
Installing options
41