IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 79 / 154

10. Use needle-nosed pliers to pull the extensions through the apertures.
Rubber
extensions
Rear
Fan
11. Reconnect cables.
Extender card
Before you begin:
v
Read “Important safety information” on page iii.
v
Review the information in “System reliability considerations” on page 35.
Note: It is recommended that the server be placed on its left side before
performing this service procedure. Rotate the feet in toward the server so
they do not detach due to the weight of the server.
To remove the system board, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See “Removing the side cover” on page 41.
4. Remove the support bracket. See “Removing the side cover” on page 41.
5. Disconnect the video connector cable.
6. Remove the extender card adapters (see “Installing an adapter” on page 43).
FRU information (service only)
69