IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 101 / 154

Error code/symptom FRU/action
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163
(Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
164
(Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
176
(Computer cover or cable removed without
use of key.)
Information only.
184
(Power-on password damaged)
1. Run the Configuration/Setup Utility program.
2. System board.
185
(Drive startup sequence information
corrupted)
1. Run the Configuration/Setup Utility program.
2. System board.
187
(VPD serial number not set.)
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
188
(Bad EEPROM CRC #2)
1. Run the Configuration/Setup Utility program.
2. System board.
189
(An attempt made to enter the system with
invalid passwords)
v Run the Configuration/Setup Utility program.
201
(Memory test error.)
1. DIMM
2. System board
289
(DIMM disabled by the user or system.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
301
(Keyboard or keyboard controller error)
1. Keyboard
2. System board
303
(Keyboard controller error)
v System board
602
(Invalid diskette boot record)
1. Diskette
2. Diskette drive
3. Drive cable
4. System board
604
(Diskette drive error)
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
Symptom-to-FRU index
91