IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 35 / 154

Diagnostics
This section provides basic troubleshooting information to help you identify and
resolve some problems that might occur.
If you cannot locate and correct the problem using the information in this chapter,
see “Symptom-to-FRU index” on page 79.
Diagnostic tools overview
The following tools are available to help you identify and resolve hardware-related
problems:
v
POST beep codes and error messages
The power-on self-test generates beep codes and messages to indicate
successful test completion or the detection of a problem. See “Power-on self-test
(POST)” on page 26 for more information.
v Error log
The POST error log contains the three most recent error codes and messages
that the system has generated during POST.
To view the contents of the error logs, start the Configuration/Setup Utility
program; then, select
Error Logs from the main menu.
v
Diagnostic programs
The system diagnostic programs are on the Device Drivers and IBM Enhanced
Diagnostics CD. These programs are the primary methods of testing the major
components of your computer. See “Diagnostic programs and error messages”
on page 27 for more information.
v Symptom-to-FRI index
This index lists problem symptoms and steps to correct each problem. See the
“Symptom-to-FRU index” on page 79 for more information.
© Copyright IBM Corp. 2002
25