IBM 6219 - IntelliStation M - Pro, Hardware Maintenance Manual

Page: 32 / 154

2. Select System Board Ethernet PXE/DHCP and use the Right Arrow (
→
) key to
set it to Enabled .
3. Select Save Settings and press Enter.
Using the SCSISelect Utility program (some models)
SCSISelect is a menu-driven configuration utility program that you can use for
models that come with a SCSI adapter. You can use this program to:
v
View the default SCSI IDs
v Locate and correct configuration conflicts
v
Perform a low-level format on a SCSI hard disk
The following sections provide instructions for starting the SCSISelect Utility
program and descriptions of the menu choices.
Starting the SCSISelect Utility program
Complete the following steps to start the SCSISelect utility program:
1. Turn on the computer.
2. When the <<< Press <CTRL><A> for SCSISelect Utility! >>> prompt appears,
press Ctrl+A.
Note: If an administrator password has been set, you are prompted to type the
password to start the SCSISelect Utility program.
3. When the question
Would you like to configure the host adapter or run
the SCSI disk utility?
appears, make your selection and press Enter.
4. Use the arrow keys to select a choice from the menu.
v
Press Esc to return to the previous menu.
v
Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
5. Follow the instructions on the screen to change the settings of the selected
items, and press Enter.
SCSISelect menu choices
The following choices appear on the SCSISelect Utility menu:
v
Configure/View Host Adapter Settings
Select this choice to view or change the SCSI controller settings. To reset the
SCSI controller to its default values, press F6; then, follow the instructions that
appear on the screen.
22
IBM IntelliStation M Pro Type 6219: Hardware Maintenance Manual