IBM 4247 Model 003, User Manual

Page: 164 / 392

Manual Feed Eject Mode
You can set Manual Feed Eject Mode value to:
Top of Form Option (Default)
Causes the printer to automatically eject the current form and begin
printing at the first possible print line when you press Load/Eject.
Automatic Top of Form
Causes the printer to automatically eject the current form and begin
printing at the first possible print line when you press Load/Eject and the
print buffer is empty. If the print buffer is not empty, the next form loaded
begins printing at the current vertical print position.
To change or check the Manual Feed Eject Mode, follow these steps:
1.
Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Setup
Manual Feed Eject Mode
5. Press Enter to display the current value.
6.
Press Scroll
↑
or Scroll
↓
until the desired value for Manual Feed Eject Mode is
displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Bar Code Print Direction
You can set the Bar Code Print Direction to:
Unidirectional (Default)
Causes the printer to print in only one direction, either from left to right or
from right to left, for each of the two passes of bar code printing on a line.
Bidirectional
Causes the printer to print as the printhead moves in both directions. (This
setting causes faster throughput but may affect print quality. Verify that the
print quality is acceptable before running a print job.)
To change or check the bar code print direction, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press Enter.
154
4247 Model 003 User’s Guide