IBM 4247 Model 003, User Manual

Page: 48 / 392

Status Indicators
The following status indicators appear on the operator panel:
v
Power
v
Ready
v
Processing
v
Online (Twinax)
v
Format/Online (Coax)
v
Attention
v
Unit Check.
You can determine printer status by checking these indicators.
Power
If on, the printer has power. If off, the printer does not have power.
Ready
If the Ready indicator is lighted, the printer is ready to print. If Ready is not
lighted, the printer is not ready to print. The printer can receive data when this
indicator is not lighted, but no data can be printed.
The Ready indicator is lighted because of one of the following conditions:
v
Successful power-on sequence
v
After pressing Start, if the indicator was off because of one of the following
conditions:
– An error condition (if the error has been corrected)
– An intervention required condition (if the error has been corrected)
– After pressing Stop
v
After pressing Enter or Start to run a test in the Operator Print Tests menu
v
After a successful partial reset to ready after pressing Cancel Print to exit the
Operator Print Tests
The Ready indicator is not lighted because of one of the following conditions:
v
After pressing Stop
v
After detection of an intervention required condition
v
After detection of a printer error
E61A5075
Power
Menu
Micro
Scroll
Enter
Hex
Print Line
Feed Form
Feed Start Cancel
Print
Ready
Processing
Online
Attention
Unit Check
Quit
Micro
Scroll
Display
Address
Return
Park/
Path Load/
Eject Set Top
of Form Stop
Test
Figure 14. 4247 Printer Operator Panel (Printer With Twinax Attachment)
38
4247 Model 003 User’s Guide