IBM 4247 Model 003, User Manual

Page: 121 / 392

High (Default)
High Contrast Bar Codes
Low Low Contrast Bar Codes
Computer Selected
Contrast as specified by the IPDS data stream
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the bar code mode, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Bar Code Mode
5.
Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for bar code mode is displayed.
7.
Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Graphics Mode
This parameter is valid only if the IPDS feature is installed. Changing the value of
this parameter can affect throughput in some printing environments.
You can set the Graphics Mode to any of the following values:
High (Default)
High Density Graphics
Low Low Density Graphics
Computer Selected
Density as specified by the IPDS data stream
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the graphics mode, follow these steps:
1.
Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
Chapter 8. Coax Configuration
111