IBM 4247 Model 003, User Manual

Page: 178 / 392

ASF Bin 2 Paper Load Position
This parameter adjusts the distance of the first printable line to the top of the
paper from -24 to +576 units (4 in.) (where each unit is 0.176 mm [1/144 in.]). The
default value is 0.
To change or check the ASF Bin 2 paper load position:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Adjustments
3. Press Enter.
4.
Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Adjustments
ASF Bin 2 Paper Load Position
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for ASF Bin 2 Paper Load
Position is displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
ASF Bin 3 Automatic Forms Thickness Adjustment (AFTA)
This parameter allows you to adjust the distance between the paper and the
printhead when the ASF device is installed and the Paper Source parameter is set
to Bin 3. Paper must be loaded for this adjustment to be effective. This adjustment
can be set to one of the following values:
-5 to +3
The printer automatically adjusts the distance between the paper and the
printhead. Each adjustment corresponds to 0.03 mm (.0012 in.). (The
default is 0, which corresponds to a gap of 0.25 mm [.01 in.] from the
paper.)
Fixed 1 to 8
Selects a fixed printhead distance value from 1 to 8 (where each value
equals approximately 0.05 mm [.002 in.]).
To change or check the ASF Bin 3 AFTA:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Adjustments
3.
Press Enter.
168
4247 Model 003 User’s Guide