Manual
ibaBM-DP
84
Issue 1.7
10.3.6.1 „General“ tab
Fig 52: „Slave diagnostics“ module – „General“ tab“
Basic settings
Locked, Enabled, Name, Modul No., Timebase
(only display),
Use name as pre-
fix
see chapter 10.3.1.1.
Profibus
Bus number
The bus on the ibaBM-DP which is connected to the PROFIBUS slave being moni-
tored with this module.
Slave number
Number of the slave which is being monitored with this module.
10.3.6.2 „Analog“ tab
On the “Analog” tab, you find a series of predefined diagnostic values:
Counter “slave resets”
Shows how often the connection between the master and the monitored slave has
been terminated and reestablished.
Voltage difference between High and Low level measured between B and A
In the device, there is a transducer, that allows you to measure the voltage differ-
ence between line B and line A for the slave which is being monitored. For detailed
information about measuring the voltage, see chapter 10.4.3.
Timeout
Timeout parameter which has been detected for the slave that is being monitored.
Various telegram counters
There are counters for the different telegram types.
