Manual
ibaBM-DP
104
Issue 1.7
Fig. 81: I/O Manager – Outputs
Note
ibaPDA processes output signals with lower priority compared to the acquisition of input
signals with a cycle not faster than 50 ms depending on the I/O configuration.
10.7.1 "ibaBM-DP" device module
The following settings on the "General" tab refer exclusively to the outputs (for more
settings, please see description chapter 10.3.1):
Bus 0/1
Enable default values
If the value is TRUE, for a slave which is not supplied with data, (e. g. broken FO
cable, stop of data acquisition in ibaPDA) the default values are sent by the device.
If the value is FALSE, the signal values which have been received last, will be re-
peated.
The default values can be individually set for the outputs for each signal. If the
value is TRUE, an additional column "Default" is displayed for the analog and digital
signals.
