ibaBM-DP
Manual
Issue 1.7
95
Firmware Update
With the <Write firmware> button, you can install firmware updates. Please select
the update file „dp_v[xx.yy.zzz]. iba“ in the browser and start the update with
<OK>.
Important note
This procedure might take some minutes and must not be interrupted. As soon as the
process has been finished, the device restarts automatically.
Reset to factory defaults
Having opened the following dialog by clicking on the button <Reset to factory de-
faults>, all settings are reset to factory settings by confirming with <Yes>.
Finally, the following message is shown:
Enter license code
Click the button <Enter license code> to open the dialog "Enter license code”.
If you have purchased an additional license from iba (redundancy, mirror, simulation
or mapping mode or the extension to 16 active slaves), enter the key that you have
received from iba in the "License code" field. With a click on <OK> the device auto-
matically detects which license(s) will be activated.
Tip
In addition to the diagnostic functions described above, the PROFIBUS browser can be
used to select signals in the “Sniffer” and “Active slave” modules. For a detailed descrip-
tion please refer to chapter 10.5.
