Manual
ibaBM-DP
80
Issue 1.7
Basic settings
Locked, Enabled, Name, Module No., Time base
(only display),
Use name as
prefix
see chapter 10.3.1.1.
Advanced
No. of decoders
Definition of the number of decoder modules (words) for this module, max. 512.
Profibus
Bus number
The bus number corresponds to the PROFIBUS connection in the module tree. You
can change the bus number, the decoder module is then displayed under the corre-
sponding PROFIBUS connection.
10.3.4.2 "Digital" tab
The signals are declared in two steps. First of all, the words you want to acquire as
source for the digital signals have to be defined in sequential order.
Fig. 49: "Sniffer decoder“ module – "Digital" tab
Enter here word signals, which contain the digital signals in sequential order. The col-
umns in the signal list have the following meaning:
Connector
Assign a meaningful name to the source word.
Slave
Enter the slave address of the slave which you have assigned the signal to
I/O
Select the I/O type of the signal :
