ibaBM-DP
Manual
Issue 1.7
105
Fig. 82: Default values of the signals
When selecting the "Output" menu, the modules which have been configured under
"Hardware" are displayed. Outputs can be used only for modules of the type "Active
slave".
You can configure a new module of the "Active slave" type by clicking on the blue
"Click to add module…" command. In the dialog box, only the "Active slave" type mod-
ule is available. Add the module by clicking on <OK>.
Fig. 83: Adding "Active slave“ module
10.7.2 "Active slave" module
The settings on the "General" tab are described in chapter 10.3.3.
Output of analog values
Define the analog values you want to output on the "General" tab.
Name
Here, you can enter a signal name and another two comments by clicking on the
symbol in the signal name field.
