SW-4000T-MCL User Manual (2.0)
Main Functions
- 57 -
To Use the Counter Function
Configure the settings as follows.
Eight counters are available. Specify a counter (Counter0 to Counter3), and configure the
settings.
Item
Setting Value
Selectable Range
Description
Counter 0 ~ 3
Counter 0 ~ 3
Select the counter.
CounterEventSource
Counter0: Off, Line Trigger
Counter1: Off, Line Start
Counter2: Off, Exposure Start
Counter3: Off, Line Transfer End
Select the Counter
Event signal for which to
read the count value.
When set to Off, the
counter operation will
stop (but will not be
reset).
CounterEventActivation RisingEdge (fixed)
Specify the timing at
which to count.
Note:
On this camera, the counter event activation is fixed to RisingEdge.
