SW-4000T-MCL User Manual (2.0)
Main Functions
- 50 -
Number of Pixels per Line and Line Rate
You can increase the line rate by decreasing the number of pixels per line. Use Width (ASCII =
WTC) to set the line width. Line rate can be increased to a maximum of 183.4 kHz for each
configuration.
The relationship between the number of pixels per line and the line rate for each CL configuration
is shown below. Widths smaller than the minimums shown will also run at 183.4 kHz.
Note:
It becomes the line rate in the case of CameralinkClockFrequency 85MHz,
PixelFormat RGB8, ExposureMode Off. The maximum line rate varies depending on
operating conditions.
