SW-4000T-MCL User Manual (2.0)
Setting List
- 63 -
DeviceControl
Display/configure information related to the device.
DeviceControl Item
Setting
Range
Default Value
Description
DeviceVendorName
-
"JAI Ltd.,
Japan"
Display the manufacturer name.
DeviceModelName
-
SW-4000T-
MCL
Display the model name.
DeviceManufacturerInfo
-
"See the
possibilities"
Display the manufacturer information.
DeviceVersion
-
-
Display the device version.
DeviceFirmwareVersion
-
-
Display the firmware version.
DeviceFpgaVersion
Display the FPGA version.
DeviceSerialNumber
-
-
Display the device ID.
DeviceUserID
Any
-
Set the user ID (16bytes) for the camera.
DeviceSFNCVersionMajor
-
2
Display the SFNC Major version.
DeviceSFNCVersionMinor
-
5
Display the SFNC Minor version.
DeviceSFNCVersionSubMinor
-
0
Display the SFNC Sub-Minor version.
DeviceManifestEntrySelector
1
1
Display the valid XML file information.
DeviceTemperatureSelector
XML1
-
Select the area of the camera's interior where the temperature
is to be measured.
DeviceTemperature
-
-
Display the internal temperature (°C) of the device.
DeviceSerialPortSelector
0:CameraLink
(Fixed)
0
DeviceSerialPortBaudRate
-
1
Display the serial port's baud rate.
1(0x01): Baud9600
2(0x02): Baud19200
4(0x04): Baud38400
8(0x08): Baud57600
16(0x10): Baud115200
DeviceReset
-
-
Reset the device.(After the camera receives this command, it
returns an ACK response and executes the reset.)
DeviceScanType
-
1: Linescan
Display the scan type of the device.
