IAI SW-4000T-MCL, User Manual

Page: 77 / 124

SW-4000T-MCL User Manual (2.0) Setting List
- 77 -
Pulse Generator Item Setting Range Default Value Description
PulseGeneratorClearInverter
0:False
1:True
0:False
Controls if the pulse generator clear signal is
inverted. False means "Active High" and True for
"Active Low".
PulseGeneratorClear
SyncMode
0:Async Mode
1:Sync Mode
0:Async Mode
Select the sync mode for the count clear input
signal.
JAI Custom Control Shading
Configure shading correction settings.
Related Topic: Shading Correction
Shading Control Item Setting Range
Default
Value
Description
ShadingCorrectionMode
0: Flat Shading
1: Color Shading
0: Flat
Shading
Select the shading correction method.
ShadingMode
0: Off
1: User1
2: User2
3: User3
0: Off
Set the area to which to save shading correction data. When
this is set to Off, PerformShadingCalibration will not be
executed.
PerformShadingCalibration - -
Execute shading correction.
Note: This function cannot be executed while TestPattern
( ImageFormatControl ) is being output. A Condition Error is also
displayed when a timeout occurs if the correction cannot be
completed.
ShadingDetectResult
0: Condition Error
1: Too Dark
2: Too Bright
3: Correction Limit
4: Complete
- Display the shading correction results.
ShadingDataSelector
0: Green
1: Red
2: Blue
0: Green
Read the shading correction data, and set the target sensor for
modification.
ShadingDataIndex 1 ~ 1024 1 Set the number of shading correction index tables.
ShadingData 0 ~ 32767 -
Display or set the shading correction data.
Note: 0x4000= x1
ShadingDataUpdate - - Make shading data reflect on video.
ShadingDataSave - -
Save data to be stored in Flash in the area specified by
ShadingCorrectionMode.