SW-4000T-MCL User Manual (2.0)
Short ASCII Command List
- 102 -
Pulse Generator
Configure pulse generator settings.
Note:
Descriptions of each command can also be found in "
" (Setting List).
Pulse Generator Name
Access
Short
ASCII
Values
Default
Value
Example / Description
ClockPreScaler
R/W
PGDEV 1 ~ 4096
1
PGDEV=[Param.]<CR><LF>
PGDEV?<CR><LF>
Set the division value for the
prescaler (12 bit) using
PixelClock as the base clock.
PulseGeneratorLength
[PulseGenerator0]
R/W
PGL0
1 ~ 1048575
1000000
PGL0=[Param.]<CR><LF>
PGL0?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator0.
PulseGeneratorLength
[PulseGenerator1]
R/W
PGL1
1 ~ 1048575
1000000
PGL1=[Param.]<CR><LF>
PGL1?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator1.
PulseGeneratorLength
[PulseGenerator2]
R/W
PGL2
1 ~ 1048575
1000000
PGL2=[Param.]<CR><LF>
PGL2?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator2.
PulseGeneratorLength
[PulseGenerator3]
R/W
PGL3
1 ~ 1048575
1000000
PGL2=[Param.]<CR><LF>
PGL2?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator3.
PulseGeneratorStartPoint
[PulseGenerator0]
R/W
PGST0 0 ~ 1048575
0
PGST0=[Param.]<CR><LF>
PGST0?<CR><LF>
Set the start point of the High
interval as a clock count for
PulseGenerator0. When the
counter reaches this value, the
output will be 1.
