SW-4000T-MCL User Manual (2.0)
Setting List
- 66 -
Acquisition Control Item Setting Range
Default Value
Description
ExposureTimeSelector
0: Common
1:Red
2:Green
3:Blue
0: Common
Specify the sensor for which to set the ExposureTime. Select
Common
if
ExposureTimeMode
is set to
Common
. Select
Red/Green/Blue if ExposureTimeMode
is set to
Individual
.
Note:
This item is available only when
ExposureMode
is set
to
Timed
.
ExposureTime (us)
Related Topic:
300 ~1514908
-
Set the exposure time (0.01 μs) for the channel selected in
ExposureTimeSelector
.
Note:
The actual exposure time will consist of the image sensor’s
offset duration (
0.85us
) deducted from the ExposureTime setting.
RBExposureInterlocked
0: Off
1:On
0: Off
If set to On, you can change Green while maintaining white
balance.
AutoReset
0: Off
1: On
0: Off
After trigger input is interrupted for a prolonged period (52 msec or
more TBD) when ExposureMode is set to Off and TriggerMode is
set to On, the over-exposed image exposed during the interruption
is output after the first trigger input after resumption. When
AutoReset mode is enabled, LVAL and DVAL images are not
output during interruption, and LVAL and DVAL image output is
resumed after the second trigger input.
RBExposureInterlocked
0: Off
1:On
0: Off
If set to On, you can change Green while maintaining white balance
AcquisitionLineRateMin
-
-
Check the minimum value of AcquisitionLineRate.
ExposureTimeMin
-
-
Check the minimum value of ExposureTime.
ExposureTimeMax
-
-
Check the maximum value of ExposureTime.
