SW-4000T-MCL User Manual (2.0)
Preparation
- 22 -
Step 2: Verify Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly
turned on, the power LED is lit green.
For details on how to read the LEDs, see the
section.
Note:
If the POWER/TRIG LED does not switch to green within minutes of supplying power,
check the DC IN/TRIG cable, the Camera Link cable and other connections.
