IAI EYECYLINDER EC-B6 Series, Instruction Manual, Page: 78 / 204

3.5 Wiring connections (for cables)
3-14
3. Wiring
● The wiring on the opposite side of the connector has not been processed.
● The cable length is available from 1m to 10m.
Specify the length in increments of 1m.
● The following shows a sample model number.
Cable length
1
m → CB-EC-PWBIO
010
-RB
Cable length
3
m → CB-EC-PWBIO
030
-RB
Cable length 10 m → CB-EC-PWBIO 100 -RB
Power I/O cable connection
Connect the power I/O cable.
Insert the connector until it clicks into place.
Caution
The connector must be inserted in a given direction.
A section of the connector protrudes. Orient this section downwards and insert until it
clicks into place.
Take appropriate care to prevent unused wiring on the opposite side of the connector
from shorting out other wires by protecting them with insulation tape.
Cable connection diagram
Insert the connector
until you hear the "click".