IAI EYECYLINDER EC-B6 Series, Instruction Manual, Page: 53 / 204

2.1 Precautions for transportation
2-1
2.
In
sta
lla
tio
n
2.1 Precautions for transportation
[Handling the package]
● Do not damage or drop the package.
The package is not specially designed to withstand dropping or shock due to collision.
● Do not have a single operator to carry a heavy package.
Use an appropriate method for transportation.
● Keep the unit in horizontal position for storage or transportation.
● Do not climb onto the package.
● Do not put anything that could deform the package on it.
[Handling after unpacking]
● Hold the base part when you carry the unit.
● Do not carry the unit by its motor cover or stainless steel sheet
● Do not damage or drop the package during transportation.
● Do not apply excessive force to any part of the ELECYLINDER. In particular, pay attention not to
apply force on the stainless steel sheet.
● The teaching port and power I/O connector are connected to the built-in controller,
so be especially careful not to apply external force.
→ For the names of each part, refer to "Part Names" on page Intro-15.
[Handling when assembled into machinery (system)]
● Secure sliders to prevent sudden movement during transport.
● If the ELECYLINDER body or any moving part is overhanging, fix it appropriately to avoid large
wobbles due to external vibration.
When transporting without fixing the tip, do not apply impact of 0.3G or more.
● When suspending machinery (system) with ropes, be careful not to catch the rope on the
ELECYLINDER or cable.